VORTEC DYNA-MODULE

Improve the performance of your Vortec by installing our high dwell Dyna-Module!
Dwell within the module controls a coils saturation time, which is the time needed by the
coil to produce a spark. The dwell in our Dyna-Module has been increased electronically
to provide the coil with additional saturation time. The result is a more intense and longer
duration spark in the combustion chamber that will improve throttle response and low end
power! Installation is easy as the Dyna-Module mounts in the original factory location
with no modifications.
Part# 000666 (Vortec Dyna Mod) $95.00

SCREAMIN' DEMON COIL

Install our 45,000 volt Screamin' Demon Coil on your Vortec and open spark plug gaps to
a massive .065"! The larger plug gap exposes more spark to the fuel mixture for the most
complete combustion possible. A more complete burn means more horsepower and better
fuel economy! Quicker starts and a smoother idle are additional benefits gained from the
Screamin' Demon Coil. This high voltage coil is too hot for stock plug wires so we suggest
our LiveWires for the best performance. Easy installation as this coil mounts in the original
factory bracket.
Part# 31731 (Screamin' Demon Coil) $59.95

VORTEC CAP AND ROTOR

Our high quality cap and rotor has excellent dielectric strength to resist carbon tracking
and corrosion. The terminals are made from super conductive brass to insure all of the
spark is delivered from the coil to the plugs.
Part# 36100 (Vortec Cap & Rotor - V8) $35.00
Part# 36200 (Vortec Cap & Rotor - V6) $35.00

LIVEWIRES

Delivering a high voltage spark to the plug requires a quality spark plug wire. Our LiveWires
are unsurpassed in quality by offering low resistance and high temperature protection. The 8
mm wire is covered by a heat treated fiberglass sleeve that protects the wire up to 1400° F. The
spiral wound core is radio suppression so there is no radio noise or computer interference.
Unlike universal plug wire sets, LiveWires do not require any assembly. All sets are custom fit
and numbered at each end for the correct cylinder. Available in red, black, blue, purple and
yellow, the LiveWires will give your Vortec the best plug wire technology along with a high
performance look.
Part# C9045 (Chevrolet, 4.3 liter V6) $109.00
Part# C9046 (SB Chevrolet, Under Headers, 90° Boot) $119.00
Part# C9047 (SB Chevrolet, Over Valve Covers, 90° Boot) $119.00
Part# C9048 (BB Chevrolet, Under Headers, 90° Boot) $119.00
Part# C9049 (BB Chevrolet, Stock Exhaust, Straight Boot) $119.00

CLICK HERE TO VIEW INSTALLATION PICTURES


*Order the entire Vortec Firepower Ignition Kit and receive a 10% discount! The kit
consists of the Screamin' Demon Coil, Dyna Module, LiveWires, Cap & Rotor.

Part # Application Reg. Price Sale Price
  VORTECKIT-45   4.3 Liter Vortec V6 $298.95 $269.06
  VORTECKIT-46   5.0 & 5.7 Liter V8 (Under Header Wires) $308.95 $278.06
  VORTECKIT-47   5.0 & 5.7 Liter V8 (Over Valve Cover Wires)          $308.95 $278.06
  VORTECKIT-48   454 CI (Under Header Wires) $308.95 $278.06
  VORTECKIT-49   454 CI (Over Valve Cover Wires) $308.95 $278.06

 

 

 

 


V8 Ignition Parts fit 1996-2003 Chevrolet 5.0, 5.7 and 7.4 Liter engines.
V6 Ignition Parts fit 1996-2007 Chevrolet, 1997-2000 Isuzu Hombre and
   1996-2001 Oldsmobile Bravada.

 

                                                        CLICK HERE TO ORDER


 

FEATURED IN STREET TRUCKS MAGAZINE!!!

Street Trucks Magazine featured a tech article in the May 2011 issue on our
Vortec Firepower Ignition. Click on the pages below to view the installation
and dyno testing of the Vortec Aluminum Distributor, Screamin' Demon Coil,
Dyna-Module and LiveWires spark plug wires.

STREET TRUCKS - May 2011 - Page 116
STREET TRUCKS - May 2011 - Page 117
STREET TRUCKS - May 2011 - Page 118
STREET TRUCKS - May 2011 - Page 119

 

 

 

 




 

If you are looking to upgrade the weak plastic distributor in your Vortec engine then look no
further. We are now offering a brand new Vortec Distributor with an all aluminum housing!
After numerous requests our engineers developed the aluminum distributor so that Vortec
owners could replace the plastic unit with a part that is stronger, more durable and longer
lasting. The aluminum housing will prevent stripping out the distributor cap retaining screws
which is a common problem with the stock housing. The new Vortec distributor is the same
dimensions as stock and the factory wiring will plug right in. The housing is polished for a
high tech look and the brass terminal cap and rotor is included. If you are overhauling your
Vortec engine or just need to replace the distributor, our new Vortec unit is the distributor
of choice.

Part# Application Price
   12625      Vortec V8 DUI Distributor                                                                       $189.00   
   12626      Vortec 4.3 V6 DUI Distributor                            $189.00   

 

 

 

Part# 12625 fits 1996-2003 Chevrolet 5.0, 5.7 and 7.4 Liter engines.
Part# 12626 fits 1996-2007 Chevrolet, 1997-2000 Isuzu Hombre and
   1996-2001 Oldsmobile Bravada.

                                        CLICK HERE TO ORDER

 

                                                                                                                                   HOME PAGE | ORDER PAGE | CONTACT US | FAQS