DUI REV LIMITER

Protect your engine from over revving with the DUI Rev Limiter. The D.U.I. Rev Limiter
drops one cylinder at a time very smoothly. This prevents fuel from loading up on the
plugs. This also avoids backfires and engine damage. Set your RPM limit with plug-in
modules. A 6000, 7000 and 8000 RPM module is included with the rev limiter. Other
RPM increment modules are available separately if needed. This unit works great with
our GM, Ford, Dodge, AMC and all other DUI distributors.
Part# 380777 GM, Ford and AMC DUI $145.00

Rev Limiter Module Kits - Even Increments
Part# 380-5000, (5000 Series) 5000, 5200, 5400, 5600 & 5800 $39.00
Part# 380-6000, (6000 Series) 6000, 6200, 6400, 6600 & 6800 $39.00
Part# 380-7000, (7000 Series) 7000, 7200, 7400, 7600 & 7800 $39.00
Part# 380-8000, (8000 Series) 8000, 8200, 8400, 8600 & 8800 $39.00

 

 

SELF POWERED TIMING LIGHT

With the unique design, lightweight and (2) "D" cell batteries, this self powered timing
light eliminates the use of an external power source such as your car battery. The timing
light utilizes a xenon bulb, which generates a strobe that is visible, even in broad daylight!
It comes with a clip-on inductive pick-up. This self powered timing light is made of impact
resistant plastic and the lens is encased in a flexible rubber nose. It's really durable in the
shop and at the track. The pick-up lead measures 48". Best of all, the timing light only
weighs 18 ounces! Works great on ALL ignition systems. We have tested them on our
equipment with extreme accuracy.
Part #380000 All Applications $75.00

 

 

VACUUM ADVANCE ELIMINATOR

Eliminate the vacuum advance on an HEI distributor with this lock-out plate. It is easy to install and uses
the same mounting screws that secure the vacuum advance. Recommended for Racing applications only.
Part# 333333 (All GM HEI and DUI) $9.95

 

 

BATTERY AND TACHOMETER CONNECTORS

These plastic insulators and brass terminals make your power supply connection and tach connection
to the DUI Distributor super easy! They plug directly into the cap and coil assembly and the locking
tabs prevent lost connections due to vibration. The Battery and Tach Connectors are priced separately
so one of each will be needed for the hot wire and tach hookup. Battery and Tachometer Connectors
are included with AMC, Ford, Dodge, Toyota and all Marine DUI Distributors.
Part# 111111 (All GM HEI and DUI) $3.25 ea.

 

 

 

14" OFFSET AIR CLEANER BASE

The large diameter cap on the DUI Distributor could interfere with the standard air cleaner. To avoid
using a smaller air filter system, the 14" Offset Air Cleaner Base will allow you to retain the larger air
cleaner by repositioning it away from the distributor. The offset base utilizes the standard 14" air filter
and top cover. The base is designed to work with most 4 barrel carburetors and is easy to install.
Comes chrome plated for a durable finish and an attractive look.
Part# 2430 (Ford & GM DUI Applications) $29.00

 

 

 

BRONZE DISTRIBUTOR GEARS

The Bronze Distributor Gear is recommended for most roller cam applications. Consult your cam
manufacturer or cam card to find out exactly if your cam requires the bronze distributor gear. Made
of a higher quality bronze than other manufacturers, this gear is designed for endurance and
performance.
Part# 412 (All Chevrolet V8's) $49.00
Part# 431 (Ford DUI289-302) $59.00
Part# 435 (Ford DUI 351W) $59.00
Part# 436 (Ford DUI 351C-400M-429-460) $59.00

 

 

 

BRASS TERMINAL CAP AND ROTOR KITS

Don't cheat your engine out of any firepower available! The cap and rotor are the finest
quality made today. This kit offers up to 50% higher dielectric strength and can handle
all the voltage available with all Brass Terminals for maximum conductivity. The improved
well design in the rotor eliminates burn-through.The material used in this kit has proven
to be the ideal resin for caps and rotors to be used in DUI, Duraspark and Breaker Point
systems. The nylon rotor screws eliminate a "ground" for the voltage to jump at high RPM's.
V8 DUI Caps are available in Blue, Black, Red, Yellow and Clear. Duraspark caps are
available in Blue or Red with a gray cap adapter.
Part# 12000 (GM HEI and All DUI, V8, Internal Coil, L-Clamp) $29.99
Part# 12000L (GM HEI/DUI V8, 85-91, Screw Hold) $35.00
Part# 15000 (GM HEI/DUI 6 Cylinder, Internal Coil, Red,Black & Blue) $29.99
Part# 32100 (Ford Duraspark V8 w/o EEC) $29.99
Part# 33100 (GM V8 with External Coil, 87-93, Black or Blue) $30.00
Part# 34100 (Ford V8 with EEC, 85-95,) $30.00
Part# 35100 (Jeep 4.0, Red, Black or Blue) $25.00
Part# 35200 (Jeep 5.2, Red, Black or Blue) $35.00
Part# 35300 (Jeep 2.5, Black) $25.00

 

 

 

 

TOGGLE SWITCH w/ COVER

Aircraft quality toggle switch with cover allows you to turn the 18 volt VIP Battery and other
accessories on and off with ease. The red cover remains in the up position when the switch
is on. Turn the switch off by simply pushing down on the red cover. Helps to prevent leaving
the voltage or other accessories on, which could cause damage to other components.
Part# 5586 (Toggle Switch) $19.95

 

 

 

CHEVROLET DISTRIBUTOR SHIMS

Nylon shims may be necessary to protect the cam and distributor gears from irregular
wear. Engines that have had the block and heads milled may allow the distributor to sit
farther down in the motor which will "bottom out" the distributor on the oil pump. This
situation puts the gears in a bind which will cause irregular wear and destruction to the
teeth of the gears. Installing a shim of correct thickness will allow the gears to mesh
properly and will prevent a costly repair down the road. These durable nylon shims fit
between the intake and distributor gasket and come in sizes of .030", .060" and .100".
Part# 26150 (Small Block & Big Block Chevrolet Distributor Shims) $8.50

 

 

CLICK HERE TO ORDER

 

HOME PAGE | ORDER PAGE | CONTACT US | FAQS