LiveWires are custom fit, so no assembly is required. Each wire is numbered on both ends
for the correct cylinder making installation, removal and re-installation quick and easy. No
cutting, splicing or crimping is required like other aftermarket wire sets. Some applications
are available for both over the valve covers and under the headers.

LiveWires have a durable and long lasting silicone jacket and insulation. Heat shrink applied
between the boot and the sleeving keeps dirt and moisture away from wire terminals. Dielectric
grease is included with all sets and should be applied to the spark plug boots to prevent
voltage leakage and keep wire terminals and boots from sticking to the plug.

LiveWires are a spiral core wire which means they have a stainless steel wire wrapped
around a magnetic core. This is a suppression type wire so there is no electronic interference
with the radio or computer and they work well with delay boxes and stutter boxes. A spiral
wound core also offers extremely low resistance of 300 - 350 Ohms per foot for optimum spark
travel.

                           Click on the Manufacturer for available part numbers

Performance Distributors Livewires are built with a protective heat sleeve
that covers the entire length of the wire. Trying to fit the Livewires in factory
wire separators is virtually impossible. Nylon zip ties can be used to keep
the wires separated but they do not offer a show quality appearance. This
led us to build a billet wire loom that will not only keep the wires apart, but
offer good looks as well. These billet separators are held together with allen
head screws which are mounted flush within the loom. These separators are
designed specifically for the Livewires and will not pinch or damage the
protective heat sleeving.