Add some serious firepower to your Ford engine by installing our DUI Distributor! The all in one
DUI (Davis Unified Ignition) has everything you need for the ignition system in one simple unit. No
external coils, modules or spark boxes are needed! Just one 12 volt hot wire connected to the DUI
will send 50,000 volts of pure spark energy to the plugs and light the cylinders like never before.
Increased horsepower, torque and fuel mileage along with quicker starting and smoother idle are
the benefits of installing the DUI. These gains are made by the high performance coil and module
and custom tuning of the advance weights and springs . The high voltage coil allows spark plug
gaps to be opened up to a massive .055". The dwell in our Dyna-Module has been increased
electronically to allow the coil to produce a longer duration spark. The combination of the large
gap and longer spark provide the most complete combustion of the fuel mixture possible. A
special weight and spring assembly is hand fitted and dialed-in using a distributor machine for
a precise timing curve that will match the specifications of your engine and vehicle. The super
smooth advance provides instant throttle response and maximum power throughout the rpm
range with no pre-detonation. Vacuum advance is provided for improved fuel economy and
cleaner spark plugs. Installation for the hot wire and a tachometer are made simple with the
included connectors. The DUI is built for durability with an upper and lower bronze bushing. Two
bushings provide shaft stability for accurate trigger signals and years of trouble free operation.
The oil impregnated bushings are also known to outlast ball bearings! The Ford DUI is based on
the HEI (High Energy Ignition) system and although it is uniquely designed, replacement parts can
be found at any local auto parts store. Don’t be fooled by the cheap imitation one wire distributors,
the DUI is unsurpassed in quality and is the original one-piece ignition system for Fords!

*Due to the large cap design, the DUI distributor may interfere with the thermostat housing on a
460. A compatible thermostat housing is available for $25.00, part number 84859. The 302 and
351W DUI will not clear a Victor Jr. intake manifold. We can extend the height 1/2" - 1 3/4" for an
additional fee of $75.00. High volume oil pumps are not recommended with the DUI as possible
irregular gear wear can occur. Click Here for additional information. The Street/Strip DUI has a
one year warranty from date of purchase.


Part # Application     Price    
  31820   Ford: 221-289-302 cid   $369.00
  32820   Ford: 351C-400M-429-460 cid   $369.00
  33820   Ford: FE 352-360-361-390-427-428 cid   $385.00
  35820   Ford: 351 cid Windsor   $369.00
  37820   Ford: 232 cid (3.8L) V6   $389.00
  38820   Ford: 302 w/ Factory Roller Cam   $399.00
  39820   Ford: 300 cid Inline 6 cylinder   $369.00
  39820-144   Ford: 144 & early 170 cid w/ 1/4" oil pump drive       $389.00
  39820-200   Ford: 170 - 200 cid Inline 6 cylinder   $389.00

 

 

 

 

 

 

 

                                                                   *NOT LEGAL FOR SALE OR USE ON ANY POLLUTION CONTROLLED VEHICLE IN CALIFORNIA

                                                                                                                                                 CLICK HERE TO ORDER

 

LIVEWIRES

Delivering a high voltage spark to the plug requires a quality spark plug wire.
Our LiveWires are unsurpassed in quality by offering low resistance and high
temperature protection. The 8 mm wire is covered by a heat treated fiberglass
sleeve that protects the wire up to 1400° F. The spiral wound core is radio
suppression so there is no radio noise or computer interference. Unlike universal
plug wire sets, LiveWires do not require any assembly. All sets are custom fit and
numbered at each end for the correct cylinder. Colors available are black, blue,
red, purple and yellow.
Recommended Part Numbers:
C9056 - Ford 302 (w/ 289 - 302 Firing Order) $105.00
C9057 - Ford 302 (w/ Windsor Firing Order) $105.00
C9059 - Ford 351W - 351C - 360FE - 460 $99.00
Click Here For More Applications

 

 

BRONZE GEARS

The Bronze Distributor Gear is recommended for most roller cam applications. Consult your
cam manufacturer or cam card to find out exactly if your cam requires the bronze distributor
gear. Made of a higher quality bronze than other manufacturers, this gear is designed for
endurance and performance.
Part# 431 (Ford 289 - 302) $59.00
Part# 435 (Ford 351 Windsor) $59.00
Part# 436 (Ford 351C - 400M - 429 - 460) $59.00

 

 

 

 

DYNA-MODULE w/ BUILT-IN REV LIMITER

Our high dwell Dyna-Module is now available with a built-in adjustable Rev Limiter! This
module performs the same as our regular Dyna-Mod by increasing spark duration but
offers the added convenience of protecting your engine from over revving. The rev limit
is adjustable through a small rotary dial on the end of the module from 5000 to 10,000 rpm.
The module also includes Traction Control Detection which immediately slows the vehicle
when a sudden change in ignition signals is detected. Works with all of our DUI and HEI
type distributors that utilize the 4 pin module.
Part# RL-000222 (Module w/ Rev Limiter) $125.00
Substitute the Rev Limiter Module for the standard 4 pin module on any DUI by adding $76.00 to the distributor
price and the letters RL in front of the part number.

 

 

DUI REV LIMITER

Protect your engine from over revving with the DUI Rev Limiter. The DUI Rev Limiter drops one
cylinder at a time very smoothly. This prevents fuel from loading up on the plugs. This also avoids
backfires and engine damage. Set your RPM limit with plug-in modules. A 6000, 7000 and 8000
RPM module is included with the rev limiter. Other RPM limiting modules are available in kit
form. See chart below for applications and price.
Part# 380777 (Rev Limiter) $145.00

Part Number Rev Limiter Module Kits - Even Increments Price
380-5000 5000 Series Module Kit - 5000, 5200, 5400, 5600 & 5800       $39.00
380-6000 6000 Series Module Kit - 6000, 6200, 6400, 6600 & 6800       $39.00
380-7000 7000 Series Module Kit - 7000, 7200, 7400, 7600 & 7800       $39.00
380-8000 8000 Series Module Kit - 8000, 8200, 8400, 8600 & 8800       $39.00

 

 

 

 

 

 

MINI-VIP

The Mini-VIP is a voltage step up regulator that works with any 12 volt battery to boost voltage output
up to 18 volts. Sending 18 volts to the Racing DUI Distributor will increase voltage output and allow
spark plug gaps to be opened up to .070" - .075". This larger gap exposes more spark to the fuel
mixture to increase the burn and produce more horsepower. The Mini-VIP has been dyno tested to
produce 16.6 more horsepower and 21.8 more pounds of torque on a two barrel Chevrolet 350 racing
engine compared to the same set-up running on 12 volts. Click Here for additional information.
Part# 5577 (Mini-VIP) $249.00

 

 

 

14" OFFSET AIR CLEANER BASE

 

The large diameter cap on the DUI Distributor could interfere with the standard air cleaner. To avoid
using a smaller air filter system, the 14" Offset Air Cleaner Base will allow you to retain the larger air
cleaner by repositioning it away from the distributor. The offset base utilizes the standard 14" air filter
and top cover. The base is designed to work with most 4 barrel carburetors and is easy to install.
Comes chrome plated for a durable finish and an attractive look.
Part# 2430 (Ford & GM DUI Applications) $29.00

 

 

 

CLICK HERE TO ORDER

 

HOME PAGE | ORDER PAGE | CONTACT US | FAQS