As you probably know, the very efficient design of the hemispherical combustion chambers
require less total timing than other engines. Taking this into consideration, we calibrate our
Hemi DUI's on a distributor machine so that your mechanical advance and initial timing are
set precisely where it needs to be for optimum performance. Due to space limitations, the
distributor is built without a vacuum advance.

No add-on spark box is required because our DUI coil and high output Dyna-Module produce
a longer duration spark initially. All you have to do is run one hot wire to the DUI (and optional
tach wire) and you're ready to run. Not only does the DUI provide you with a cleaner engine
compartment, but your coil and module are protected from the elements.

With the DUI's more intensive firepower, spark plug gaps can be opened up to .050" - .055".
More importantly, the voltage output does not drop under load. This feature is a great
complement to the hemispherical design.

Craftsmanship is exemplary with the DUI. Both an upper and lower bushing are utilized. This
prevents spark scatter while improving longevity. The unit is polished and lubricated where
necessary. If you need to call us for tech support, provide us with your individual I.D. number
which we engrave on the bottom of your distributor housing.

Whether you are running a new 426 crate engine or an early 426 production Hemi, we can set
up a DUI for your application. The DUI is available in our Street/Strip (7000 rpms), Racing
(9000 rpms) and Marine versions.

DIMENSIONS: The Hemi DUI measures 15.5" from the hold down clamp to the top of the
cap. The diameter of the distributor cap is 5 1/4".

Part # Application Reg. Price
  70940   Dodge/Chrysler Street/Strip DUI: 426 Hemi                                              $479.00  
  709412   Dodge/Chrysler Racing DUI: 426 Hemi           $569.00  

 

 


Part # Application - DUI Distributor and LiveWires Reg. Price Sale Price
  K70940   Dodge/Chrysler Street/Strip DUI: 426 Hemi           $578.00     $520.20  
  K709412   Dodge/Chrysler Racing DUI: 426 Hemi           $668.00     $601.20  

 

 


                                                         CLICK HERE TO ORDER

 

LIVEWIRES

Don't forget to run quality spark plug wires with your DUI Distributor! The LiveWires
will compliment the DUI like french fries to a hamburger! LiveWires come with space age,
heat resistant sleeving to provide protection from exhaust heat. The sleeving is heat
treated glass braid and is non-flammable and non-corrosive to chemicals. LiveWires are
custom fit - no assembly is required. Each wire is numbered at each end for the correct
cylinder. LiveWires have a durable and long lasting silicone jacket and insulation. Spiral
wound core prevents electronic interference - no radio noise or computer interference.
Available in blue, black, red, yellow & purple.
Recommended Part Number:
C9065-426 - (Dodge/Chrysler Hemi) $99.00
CLICK HERE FOR THE LIVEWIRES PAGE

 

 

 

DYNA-MODULE w/ BUILT-IN REV LIMITER

Our high dwell Dyna-Module is now available with a built-in adjustable Rev Limiter! This
module performs the same as our regular Dyna-Mod by increasing spark duration but
offers the added convenience of protecting your engine from over revving. The rev limit
is adjustable through a small rotary dial on the end of the module from 5000 to 10,000 rpm.
The module also includes Traction Control Detection which immediately slows the vehicle
when a sudden change in ignition signals is detected. Works with all of our DUI and HEI
type distributors that utilize the 4 pin module.
Part# RL-000222 (Module w/ Rev Limiter) $125.00
Substitute the Rev Limiter Module for the standard 4 pin module on any DUI by adding $76.00 to the distributor
price and the letters RL in front of the part number.

 

 

 

DUI REV LIMITER

Protect your engine from over revving with the DUI Rev Limiter. The D.U.I. Rev Limiter
drops one cylinder at a time very smoothly. This prevents fuel from loading up on the
plugs. This also avoids backfires and engine damage. Set your RPM limit with plug-in
modules. A 6000, 7000 and 8000 RPM module is included with the rev limiter. Other
RPM increment modules are available separately if needed. This unit works great with
all of our DUI distributors.
Part# 380777 $145.00

Rev Limiter Module Kits - Even Increments
Part# 380-5000, (5000 Series) 5000, 5200, 5400, 5600 & 5800 $39.00
Part# 380-6000, (6000 Series) 6000, 6200, 6400, 6600 & 6800 $39.00
Part# 380-7000, (7000 Series) 7000, 7200, 7400, 7600 & 7800 $39.00
Part# 380-8000, (8000 Series) 8000, 8200, 8400, 8600 & 8800 $39.00

 

CLICK HERE TO ORDER

 

HOME PAGE | ORDER PAGE | CONTACT US | FAQS