Dyna-Batt

Lighten up your street car, hot rod or race car! Remove the heavy 40 lb battery and replace it with Performance Distributors 13.5 lb Dyna-Batt. The Dyna Batt produces more power per pound than any battery on the market. It has the cranking power of wet cell batteries three times its size! This is due to the extremely low internal resistance which allows faster, more consistant starting. The Dyna Batt does not have a cold cranking amp rating like other batteries, but has been tested to crank engines with compression ratios as high as 15:1. The reserve capacity of the Dyna Batt is 16 Amp Hours. The Dyna-Batt is completely dry cell and can withstand the rigors of high performance and racing enviornments. It is built with corrosion resistant terminals and is truly maintenance free. The Dyna Batt has an excellent storage life and recharges very quickly. Any 12 volt charger can be used to recharge the Dyna Batt but a low amperage battery charger/maintainer, much like the charger/maintainer we sell listed below, is recommended to avoid overcharging the battery. This battery works great with one of our alternators!

SPECIFICATIONS: Weight = 13.5 lbs, Dimensions: Length = 7", Width = 3" & Height = 6 1/2" ,
Reserve Capacity = 16 Amp hours, Cold Cranking Amps = Not Rated

Part# 5575A comes with 1/O gage terminals that must be crimped onto the battery cable. This design is used in many racing applications and GM vehicles to replace the side post design.
Part# 5575B has standard size top post terminals that will work with most applications that originally came with a top post style battery. This is our most popular design that replaces the stock battery in most domestic and foreign vehicles without modifying the battery cables.
Part# 5575C does not have terminals but includes bolts and washers. This style is designed to work with motorcycles and personal watercraft that have the terminals with 1/4" holes attached to the factory battery cable.

  • Part# 5575A w/ 1/O gage terminals $155.00 $119.00
  • Part# 5575B w/ top post terminals $155.00 $119.00
  • Part# 5575C no terminals $155.00 $119.00

     

    Dyna-Batt Battery Box

    NEW custom designed battery box for the Dyna Batt! Due to the small size of the Dyna Batt, mounting this battery can be difficult. Its compact size does not fit factory battery trays without some type of modification. The new battery box we are offering will help solve the mounting woes. This box fits the Dyna Batt perfectly and allows for secure mounting without the use of bungee cords or homemade brackets. Made of heavy gage steel and powder coated in engine utility, this attractive box will blend with almost any engine compartment.

    Part# 5475 (Dyna Batt) $79.00

     

    "BATTERYMINDER" 12 Volt Charger/Maintainer/Conditioner

    Don't just charge your batteries....Condition them!

    The BatteryMINDer PLUSŪ automatically dissolves harmful power-robbing sulphation using safe, U.S. patented high-frequency pulse technology3. Guaranteed to significantly increase your battery's life and performance, or you get 100% of your money back within 1-year. This guarantee is in addition to our five (5) year "no hassle" warranty.

    The BatteryMINDer PLUSŪ is a 3-mode charger/maintainer/conditioner that extends performance and life of all types and sizes of 12 Volt lead acid batteries. These include maintenance-free, marine, deep cycle, sealed, gel, and all popular brands of AGM dry-type, valve-regulated batteries, such as the Dyna-Batt.

    (1) 1.33 Amps = Maximum charging current when battery is fully discharged.
    1.0 Amp = Maximum current available if required by battery when unit is in maintenance mode.
    (2) Rated #1 by Motorcycle Consumers News, Feb. 05.
    (3) Sulphation is the #1 cause of early battery failure and loss of performance as determined by the Battery Council International, Dec. 1998.

    • Safely charges-maintains-conditions all size/type/brand starter, deep cycle, maintenance-type, maintenance-free, sealed, gelled, AGM or dry-type batteries.
    • Charges and maintains from 1 to 5 batteries at a time (12 Volt batteries parallel-connected or 6 Volt batteries series-connected) for less than 15Ē per month.
    • Guaranteed to never overcharge any battery, regardless of how long connected.
    • Full-Time Desulphation-automatically dissolves harmful sulphate when unit is in either the charge or maintenance modes, using safe U.S. Patented pulse technology.
    • No need to add water to maintenance-type batteries during long, non-use storage.
    • Isolation transformer and smart chip technology ensure safe, long-term performance.
    • Automatic reset thermostat - prevents damage to charger when unit is connected to faulty battery
    • Full-time battery monitoring - automatically tests battery every microsecond, supplying only the current needed to maintain battery at full charge.
    • Weatherproof; conformal-coated circuitry ensures trouble-free life even in high-moisture marine environments.
    • Allows battery to be stored safely at 0°F to +120°F.
    • Unit comes complete with Qwik connect/disconnect battery clips and a ring terminal assembly (with easily replaceable fuse) for permanent connection.
    • Full year 100% money-back guarantee takes the risk out of trying this product.
    • Five (5) year "No Hassle" warranty covers everything except physical abuse.

    General Specifications

    Input 105-130 Vac 50/60 Hz
    Output 12 volts @ 1.33 Amps
    Charge Voltage 14.2 - 14.4 Vdc
    Float Voltage 13.4 volts
    Desulphation Pulse 1.0A @ 3.26 MHz
    Float Current 5 mA - 1Amp
    Size/Weight 3-3/4" L x 2-1/2" W x 2-1/4" H / 2.3 lbs.

    Part# 5580 (12 Volt Charger/Maintainer/Conditioner) $75.00