Engineered specifically for the F-150 5.0 ignition system, Performance Distributors' new F-150 Firepower Ignition Kit will provide you with measureable performance gains.

The Dyna Module has more electronic dwell time dialed into it to provide your coil with more saturation time. The extra dwell time allows your coil to produce a more intense spark for crisper acceleration. Mounts in the original equipment location.

The Screamin' Demon Coil allows you to open up the spark plug gaps to .060", which burns the fuel mixture more completely. Working in conjunction with the Dyna Mod, these two components will provide better throttle response, more horsepower and improved fuel economy. No drop off in power as you accelerate. The brass terminal coil tower is more conductive than the stock aluminum terminal, while also resisting corrosion. Your spark plugs stay cleaner longer. A heavy duty brass terminal cap and rotor are included in either red or blue.

LiveWires spark plug wires are constructed with a space age, heat resistant sleeving, able to withstand up to 1400 degrees! Approximately 10mm in diameter, the LiveWires look as good as they perform. Spiral wound core prevents electronic interference - no radio noise or computer interference. Each wire is numbered for the correct cylinder.

The components are available separately or in kit form. Order the complete kit (Part# F150KIT-5.0 or XF150KIT-5.0) and receive a 10% discount!

Part# 31724 (Screamin' Demon Coil Packs) $69.95
Part# 000555 (5.0 Dyna Mod 1984-1990) $69.95
Part# X000555 (5.0 Dyna Mod 1991-1996) $69.95
Part# 34100 (Cap & Rotor) $35.00
Part# C9057 (LiveWires) $105.00
Part# F150KIT-5.0 (SD Coil, 5.0 Dyna Mod, LiveWires & Cap and Rotor 1984-1990) $279.90 $251.91
Part# XF150KIT-5.0 (SD Coil, 5.0 Dyna Mod, LiveWires & Cap and Rotor 1991-1996) $279.90 $251.91

*Billet Wire Looms are not included with the F150KIT-5.0 or XF150KIT-5.0.

 

Performance Distributors Livewires are built with a protective heat sleeve that covers the entire length of the wire. Trying to fit the Livewires in factory wire separators is virtually impossible. Nylon zip ties can be used to keep the wires separated but they do not offer a show quality appearance. This led us to build a billet wire loom that will not only keep the wires apart, but offer good looks as well. These billet separators are held together with allen head screws which are mounted flush within the loom. These separators are designed specifically for the Livewires and will not pinch or damage the protective heat sleeving.
Part# 9100 (All V8 Applications) $59.00 (Kit includes 2 - 4 Hole Looms and 5 - 2 Hole Looms)
Looms are available separately: 4 Hole = $13.80 ea., 3 Hole = $13.80 ea., 2 Hole = $6.60 ea.

 

Click Here to Order